A triaxial cutting force measurement utilizing an embedded transducer on a spindle rotating tool

Muhammad Rizal; Jaharah A. Ghani; Mohd Zaki Nuawi; Che Hassan Che Haron

doi:10.1109/ICSensT.2015.7438409

A triaxial cutting force measurement utilizing an embedded transducer on a spindle rotating tool

Closed

Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi, Che Hassan Che Haron

2016 Proceedings of the International Conference on Sensing Technology, ICST Vol. 2016-March Conference paper Cited by 3 SDG 17SDG 7SDG 16

Abstract

This paper presents the development of an embedded force transducer for cutting force measurement in a milling process. A cross beam type transducer is selected as the sensitive element of the designed sensor system. By using strain gauges, this system is capable of measuring the triaxial cutting force in rotating coordinate-based, including the main cutting forces, Fc, thrust force, Ft, and perpendicular cutting force, FcN. This sensor system is equipped with a wireless telemetry system to transfer the force signal to the data acquisition device. The sensor is experimentally investigated and calibrated. Transducer sensitivity, cross-talk and results of the machining signal are presented. As well as the cutting force measurement, this triaxial transducer could be used on milling and drilling operations. © 2015 IEEE.

Affiliations

Department of Mechanical Engineering, Faculty of Engineering, Syiah Kuala University, Darussalam, Banda Aceh, 23111, Indonesia; Department of Mechanical and Materials Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi, 43600, Malaysia

View full text (DOI) →

Research at a Glance

Research at a Glance

Topics & SDG Alignment

Collaboration

Author Profile (Selected)

References Overview

Journal & Source

Metadata & Integrity