Elin Yusibani, Yosuke Nagahama, Masamichi Kohno, Yasuyuki Takata, Peter L. Woodfield, Kanei Shinzato, Motoo Fujii
A capillary tube viscometer was developed to measure the dynamic viscosity of gases for high pressure and high temperature. The apparatus is simple and designed for safe-handling operation. The gas was supplied to the capillary tube from a high-pressure reservoir tank through a pressure regulator unit to maintain a steady state flow. The measurements of a pressure drop across the capillary tube with high accuracy under extreme conditions are the main challenge for this method. A differential pressure sensor for high pressures up to 100MPa is not available commercially. Therefore, a pair of accurate absolute pressure transducers was used as a differential pressure sensor. Then the pressure drop was calculated by subtracting the outlet pressure from the inlet one with a resolution of 100 Pa at 100 MPa. The accuracy of the present measurement system is confirmed by measuring the viscosity of nitrogen as a reference gas. The apparatus provided viscosities of nitrogen from ambient temperature to 500K and hydrogen from ambient temperature to 400 K and for pressures up to 100MPa with a maximum deviation of 2.2% compared with a correlation developed by the present authors and with REFPROP (NIST). © Springer Science+Business Media, LLC 2011.
Department of Mechanical Engineering, Kyushu University, Fukuoka, Japan; Research Center for Hydrogen Industrial Use and Storage (HYDROGENIUS-AIST), Nishiku, Fukuoka, 744 Motooka, Japan; School of Engineering, Griffith University, Nathan, Australia; Physics Department, Universitas Syiah Kuala, Banda Aceh, Indonesia; International Institute for Carbon-Neutral Energy Research (I2CNER), Kyushu University, Fukuoka, Japan
Research at a Glance
Register to unlockTopics & SDG Alignment
Register to unlockCollaboration
Register to unlockAuthor Profile (Selected)
Register to unlockReferences Overview
Register to unlockJournal & Source
Register to unlockMetadata & Integrity
Register to unlock