Palm oil hydrodeoxygenation into green diesel over NiO/NbOPO4 catalyst: A novel approach of synthesizing NbOPO4 from NbCl5

Closed

Firda Tirta Yani, Husni Husin, Darmadi, Syaifullah Muhammad, Faisal Abnisa, Nurhazanah, Fahrizal Nasution, Erdiwansyah

2022 Journal of Cleaner Production Vol. 354 Article Cited by 28 SDG 7SDG 17 Quartile

Abstract

Green diesel is an emerging alternative fuel that could be produced from a series of biomass conversion, of which is catalytic hydrodeoxygenation. Herein, we aimed to study the effect of pH and calcination temperature on the preparation of NiO/NbOPO4 catalyst for hydrodeoxygenation of palm oil into green diesel. The catalyst was prepared through a sol-gel method at pH 2, 4, 6, and 8, respectively. Subsequently, the calcination was carried out on the catalyst at a variation of temperature (600, 700, and 800 °C). The green diesel was produced using a hydrothermal autoclave reactor at 250 °C with a pressure of 3.5 MPa for 5 h. X-ray diffraction analysis confirmed the formation of NiO/NbOPO4, where the crystallinity index reached 77%. Morphological, elemental content, and functional group analyses, altogether revealed that the prepared catalyst had nano-size distribution along with various sets of Nb-P bonds. The hydrodeoxygenation using NiO/NbOPO4 catalyst, prepared at pH 8 and 800 °C calcination temperature, succesfully removed the oxygen content of saturated and unsaturated fatty acids from the palm oil with a yield as high as 85.747%. Gas chromatography-mass spectroscopy on the produced green diesel using NiO/NbOPO4 catalyst with 8% nickel loading showed the dominance of C12-C15 fraction (97.07%), which is mostly occupied by C15 (pentadecane) molecules (58.14%). Last but not least, we propose NiO/NbOPO4 as a very promising catalyst for industrial-scale green diesel production. © 2022 Elsevier Ltd

Affiliations

Doctoral Program, School of Engineering, Universitas Syiah Kuala, Banda Aceh, 23111, Indonesia; Reaction Engineering and Catalysis Laboratory, Department of Chemical Engineering, Universitas Syiah Kuala, Banda Aceh, 23111, Indonesia; Department of Chemical and Materials Engineering, Faculty of Engineering, King Abdulaziz University, Rabigh, 21911, Saudi Arabia; Faculty of Engineering, Universitas Serambi Mekkah, Banda Aceh, 23245, Indonesia

Research at a Glance

Premium content — register to unlock

Research at a Glance

Register to unlock

Topics & SDG Alignment

Premium content — register to unlock

Topics & SDG Alignment

Register to unlock

Collaboration

Premium content — register to unlock

Collaboration

Register to unlock

Author Profile (Selected)

Premium content — register to unlock

Author Profile (Selected)

Register to unlock

References Overview

Premium content — register to unlock

References Overview

Register to unlock

Journal & Source

Premium content — register to unlock

Journal & Source

Register to unlock

Metadata & Integrity

Premium content — register to unlock

Metadata & Integrity

Register to unlock