Muhammad Amin, Hamdani Umar, Fazri Amir, Suma Fachruri Ginting, Putu Brahmanda Sudarsana, Wayan Nata Septiadi
One way to overcome the scarcity of clean water through sustainable approach is by utilizing a solar distillation system. This easy-to-use technology is adopting tubular solar distillation. The three main components, which are the most essential for producing the amount of permeate, are the solar collector, tubular and heat exchanger (HE). This study aims to determine the performance of a tubular solar distillation device equipped with HE using a parabolic trough collector (PTC). The PTC has an area of 5.1 m2 covered with a solar reflective chrome film. Aluminum tubular acts as the feedwater heater. The HE is placed inside the tubular, which acts as a coolant to convert the steam phase into freshwater/permeate and as a feedwater heater to flow into the tubular. In the present study, several parameters were tested: comprise temperature, solar radiation, pressure, humidity, mass flow rate, permeate productivity and efficiency. This study demonstrated the production of a sufficient amount of permeate, which was 5.32 L for 6 h. The efficiency of this device yielded a peak of 48.2% during solar radiation of 813 W/m2 in an average ambient temperature of 32 °C, with an overall average of 44.59%. © 2022 by the authors.
Department of Mechanical Engineering, Faculty of Engineering, Universitas Samudra, Kota Langsa, 24416, Indonesia; Department of Mechanical Engineering, Universitas Syiah Kuala, Banda Aceh, 23111, Indonesia; Department of Mechanical Engineering, Udayana University, Badung, 80361, Indonesia
Research at a Glance
Register to unlock
Topics & SDG Alignment
Register to unlock
Collaboration
Register to unlock
Author Profile (Selected)
Register to unlock
References Overview
Register to unlock
Journal & Source
Register to unlock
Metadata & Integrity
Register to unlock