The Role of Typha angustifilia Fiber–Matrix Bonding Parameters on Interfacial Shear Strength Analysis

Open

Syifaul Huzni, Ikramullah Ikramullah, Israr B. M. Ibrahim, Syarizal Fonna, Teuku Arriessa Sukhairi, Andri Afrizal, Umar Muksin, H.P.S. Abdul Khalil, Sri Aprilia, Samsul Rizal

2022 Polymers Vol. 14 Issue 5 Article Cited by 2 SDG 16SDG 17 Quartile

Abstract

The microbond test of natural fibers tends to produce scattered interfacial shear stress (IFSS) values. The sources of this scattering are known, but the roles they play in producing high IFSS scattering remain to be investigated. In this study, a numerical method was used to simulate mi-crobond testing and to examine the experimental parameters in a microbond test of Typha angustifolia fiber/epoxy. Three parameters were considered: fiber diameter, fiber length embedded in the epoxy, and the distance between the vise and the specimen. The geometries were modeled and analyzed by ABAQUS software using its cohesive zone model features. There were two types of contact used in this analysis: tie constraint and surface-to-surface. The results showcased the roles of the following experimental parameters: a larger fiber diameter from a sample increased the IFSS value, a longer embedded length reduced the IFSS value, and a shorter vise–specimen distance increased the IFSS value. The IFSS scattering in the microbond test could have originated from the interaction between these parameters. Of the three parameters, only the vise–specimen distance was found to be able to be reasonably controlled. When the IFSS value was atypically large, fiber diameter and/or embedded length potentially drove the scattering. This study advises further compilation and classification of the role of each experimental parameter in modulating the IFSS value. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.

Affiliations

Department of Mechanical and Industrial Engineering, Universitas Syiah Kuala, Darussalam, Banda Aceh, 23111, Indonesia; Department of Physics, Universitas Syiah Kuala, Darussalam, Banda Aceh, 23111, Indonesia; School of Industrial Technology, Universiti Sains Malaysia, Penang, 11800, Malaysia; Department of Chemical Engineering, Universitas Syiah Kuala, Darussalam, Banda Aceh, 23111, Indonesia

Research at a Glance

Premium content — register to unlock

Research at a Glance

Register to unlock

Topics & SDG Alignment

Premium content — register to unlock

Topics & SDG Alignment

Register to unlock

Collaboration

Premium content — register to unlock

Collaboration

Register to unlock

Author Profile (Selected)

Premium content — register to unlock

Author Profile (Selected)

Register to unlock

References Overview

Premium content — register to unlock

References Overview

Register to unlock

Journal & Source

Premium content — register to unlock

Journal & Source

Register to unlock

Metadata & Integrity

Premium content — register to unlock

Metadata & Integrity

Register to unlock