Synthesis and Characterizations of Fe3O4Added with Al2O3Nanoparticles via Sol-Gel Technique

Open

Mohdshahadan Mohd Şuan, Chew Ke Chin, Jeefferie Abd Razak, Hazman Hasib, Mohdasyadi 'Azam Mohd Abid, Irwan Nurdin

2020 IOP Conference Series: Materials Science and Engineering Vol. 957 Issue 1 Conference paper Cited by 2 SDG 17SDG 12SDG 14 Quartile

Abstract

A single step sol-gel has been established as a new route for synthesizing AkCb-added Fe3O4 nanoparticles. In this work, the effects of Al2O3 composition towards the micro structure and magnetic properties of AkCb-added Fe3O4 samples were investigated. A series of Fe and Al nitrate mixture solutions were prepared by varying the Al nitrate composition from 2.0 wt. % to 10.0 wt. %. A dropwise of propylene oxide has dimed out the clear red mixture solution with a significant release of heat before turned into a gel. The gel was dried at 90 C for 48 h in a ventilated oven which then pulverized into a powder by using mortar grinder. The powder was calcinated at 900 C for 1 h in a normal furnace atmosphere. The XRD results revealed that the existence of polycrystalline Fe3O4 were completed at calcination temperature 900 C. The SEM images of the Fe3O4 with 10.0 wt.% of Al2O3 samples showed a distinct nanoparticles micro structure due to the increased of Fe3O4 nucleation initiated by Al2O3 nanoparticles. The Vickers microhardness of the Al2O3 added Fe3O4 samples were significantly increased as the Al2O3 content was increased up to 10.0 wt.% attributed from good distribution of Al2O3 nanoparticles in the sample. Subsequently, the magnetic properties of Fe3O4 investigated by alternating gradient magnetometer, AGM was insignificantly reduced by the addition of Al2O3 nanoparticles. This work indicated that the sol-gel reaction is an effective method to achieve uniform distribution and high purity of AkCb-added Fe3O4 nanoparticles with optimum microhardness and ferromagnetic performances. © Published under licence by IOP Publishing Ltd.

Affiliations

Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia Melaka, Durian Tunggal, Melaka, 76100, Malaysia; Chemical Engineering Department, Lhokseumawe State Polytechnic, Aceh, 24301, Indonesia

Research at a Glance

Premium content — register to unlock

Research at a Glance

Register to unlock

Topics & SDG Alignment

Premium content — register to unlock

Topics & SDG Alignment

Register to unlock

Collaboration

Premium content — register to unlock

Collaboration

Register to unlock

Author Profile (Selected)

Premium content — register to unlock

Author Profile (Selected)

Register to unlock

References Overview

Premium content — register to unlock

References Overview

Register to unlock

Journal & Source

Premium content — register to unlock

Journal & Source

Register to unlock

Metadata & Integrity

Premium content — register to unlock

Metadata & Integrity

Register to unlock