F. Fitriani, H. Husin, M. Marwan, F. Nasution, Z. Zuhra, T.M. Asnawi, H. Hisbullah
In this study, peel durian ash was used as a solid catalyst to convert rubber seed oil into biodiesel production via transesterification reaction. The catalyst was fabricated by simple burning and calcined at 600°C for 8 h. The morphology of particles was confirmed by Scanning Electron Microscopy (SEM). The Energy-dispersive X-ray Analysis (EDX) was used to obtain the atomic composition and percentage of the catalyst. The reaction was carried out at 65°C for 1 h. Whereas, the catalyst loading were varied of 1.0%, 2.5%, 5.0%, 10% and 15% wt.%. From EDX data was confirmed that the ash catalyst composes of the potassium oxide (K2O) as the dominant compound. The performance of the catalyst was evaluated from a transesterification reaction for biodiesel production. The highest biodiesel yield of 96.5% was obtained in the reaction using a catalyst of 10 wt.%. The density obtained was 0.865 gr/cm3 confirming the produced biodiesel complies with the SNI standard. © Published under licence by IOP Publishing Ltd.
Graduate Program in Chemical Engineering, Universitas Syiah Kuala, Banda Aceh, 23111, Indonesia; Department of Chemical Engineering, Universitas Syiah Kuala, Banda Aceh, 23111, Indonesia
Research at a Glance
Register to unlock
Topics & SDG Alignment
Register to unlock
Collaboration
Register to unlock
Author Profile (Selected)
Register to unlock
References Overview
Register to unlock
Journal & Source
Register to unlock
Metadata & Integrity
Register to unlock