Irwan, Anwar Fuadi, Suhendrayatna
The inhibition effect of ascorbic acid against the corrosion of low carbon steel in the marine environment which is represented by NaCl 3.5% solution was studied by weight loss method. The investigations were conducted at the various concentrations of ascorbic acid and immersion time. The effect of ascorbic acid concentration and immersion time on the corrosion rate and inhibition efficiency were measured. The corrosion rate was calculated by the weight loss of the sample at initial and after immersion in the corrosive medium. The results showed that the ascorbic acid exhibit good corrosion inhibitor for low carbon steel in NaCl 3.5% solution. The rate of corrosion decreased with the increase of ascorbic acid concentration and immersion time. The efficiency inhibition of ascorbic acid on low carbon steel corrosion in NaCl 3.5% increase with the rise of concentration and immersion time, which is the maximum of 85.4% at 50 ppm and 15 days immersion time. The action of inhibition is attributed to the adsorption of the inhibitor molecules on the low carbon steel surface following Langmuir adsorption isotherm. © Published under licence by IOP Publishing Ltd.
Department of Chemical Engineering, Lhokseumawe State Polytechnic, Lhokseumawe, 24301, Indonesia; Department of Chemical Engineering, Syiah Kuala University, Banda Aceh, Indonesia
Research at a Glance
Register to unlock
Topics & SDG Alignment
Register to unlock
Collaboration
Register to unlock
Author Profile (Selected)
Register to unlock
References Overview
Register to unlock
Journal & Source
Register to unlock
Metadata & Integrity
Register to unlock